Products

 
Low Noise Amplifier Testing Challenges

Low Noise Amplifier Testing Challenges

Anritsu VectorStar Brings Industry First 125 GHz VNA NF Measurement Capability. Designers, modelers, and manufacturers of RF and microwave frequency amplifiers used in applications such as radar, wireless communication, or high-speed digital communication systems at either the wafer-level or as a packaged part face many test challenges. Higher performance requirements in the face of tighter budgets and more demands on test engineer time result in the need for test systems which provide technical leadership while remaining cost effective, easy to use, and flexible.
Home page PDF
MG3710A-Vector Signal Generator

MG3710A-Vector Signal Generator

The MG3710A is a vector signal generator with 6-GHz upper frequency limit and 120-MHz wide RF modulation baseband generator. It outputs various radio systems signals for cellular communications, such as LTE FDD/TDD, W-CDMA, GSM as well as narrowband communications, such as WLAN, WiMAX, Bluetooth and GPS.
Home page PDF
MS4640B-VectorStar

MS4640B-VectorStar

The VectorStar™ family is Anritsu's Premium VNA line, providing the highest overall performance on a modern platform. The MS4640B VectorStar VNA offers the broadest coverage in a single instrument, 70 kHz to 70 GHz. The additional two decades at the low end are even more impressive than the guaranteed 70 GHz coverage on the high end. PulseView™, when combined with the innovative IF digitizing option, offers industry-leading 2.5 ns pulse resolution and 100 dB dynamic range with no compromises or trade-offs due to varying duty cycles. PulseView provides real time display of pulse measurements while dynamically modifying pulse parameters for immediate design validation.
Home page PDF
MT9090A-Network Master Series

MT9090A-Network Master Series

The new, palm-size MT9090A modular platform from Anritsu finally addresses all of these needs. Users can interchange different modules to configure the MT9090A as an optical fault locator, general purpose OTDR, CWDM optical channel analyzer or 10/100/1000MB Ethernet tester. Operation is quite similar between modules so the user is immediately familiar with operation. Despite its small size, the MT9090A does not compromise performance or features. With a high resolution indoor/outdoor display, excellent optical performance, innovative features and expandable modular design, the MT9090A Network Master is clearly in a different class than most other "handheld testers".
Home page PDF
MD8475A-Signalling Tester

MD8475A-Signalling Tester

The MD8475A Signalling Tester is an all-in-one base station simulator supporting LTE FDD, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, and CDMA2000® 1X/1xEV-DO Rev. A. It supports service and call-processing tests for multimode LTE smartphones and mobiles with excellentcost-performance. Supports combination of LTE/LTE, LTE/W-CDMA, LTE/GSM and LTE/CDMA2000; requires two MD8475A units for testing LTE/CDMA2000.
Home page PDF
MP1800A-Signal Quality Analyzer

MP1800A-Signal Quality Analyzer

The MP1800A Signal Analyzer offers various modules and options for customizing functions to requirements. Functions are easily extended by adding modules and options to support new future needs. This guide will help you select the best configuration matching needs by describing functions, selections and combinations of modules and options.
Home page PDF
EB Tough VoIP Feild Phone

EB Tough VoIP Feild Phone

Elektrobit has developed a tactical communication solution which provides last-mile broadband wired IP connectivity for data and integrated voice (VoIP) services. With the EB Tough VoIP, users can utilize all IP connectivity even in the most difficult environments. The system can be seamlessly integrated to the existing IP infrastructure.
Home page PDF
Noisecom CNG-EBNO

Noisecom CNG-EBNO

The instrument sets, and maintains a highly accurate ratio between a user supplied carrier and internally generated noise, over a wide range of signal power levels and frequencies. The internal power meter provides repeatable SNR waveforms for accurate signal generation. The instrument gives system, design, and test engineers in the telecommunications industry a single tool to generate precision signal to noise ratios. These signals are used to compare theoretical BER to SNR ratios, found in “waterfall” type graphs, with measured values from the DUT to evaluate different modulation schemes. Users can obtain higher yield through automated testing, plus increased confidence from repeatable, accurate test results. Standard units can be modified for specific customer requirements. Please consult the factory for pricing and availability.
Home page PDF
Chambers systems

Chambers systems

QuadBox is suitable for use in all types of buried networks and utilities. It is ideally suited to telecom networks and is the first modular joint box system to be approved by BT for use in its national network. QuadBox can be used for both new build and retrofit. The modular design of QuadBox makes it perfect for retrofitting on existing ducted networks. Chambers can also be benched to avoid existing services and duct entries can be cut in any location.
Home page PDF
MiniGlide

MiniGlide

MiniGlide is the ideal solution for housing backbone and feeder cables where initial fibre count is high and compliments MicroGlide microtubing which is generally used to connect the final section to the end user. Designed for use with mini-cable (up to 144 fibre) it offers high fibre capacity and allows fibre to be blown in as and when required, providing vast expansion scalability with minimal initial investment.
Home page PDF
A178-Hand-Held Core-Alignment Fusion Splicer

A178-Hand-Held Core-Alignment Fusion Splicer

The A178 is new state-of-art core alignment product in the Fitel S17x series. It is equipped with newly developed optical alignment system that cuts the entire splicing time by 20%. It also incorporates an improved heating mechanism, which shortens the protection sleeve shrinking time by more than 30%. The new battery system can provide splicing cycle (splicing/heating) up to 200 without additional attached battery unit. The rubber protection corners and metal body frame make this unit very rugged, robust and strong. Finally the size of this new unit is much smaller compared to its previous models and weight is also significantly reduced.
Home page PDF
NC6000A/8000A Series

NC6000A/8000A Series

The NC6000/8000A Series Noise Generators are Manually Operated for the RF Benchtop Designed for General-Purpose Broadband Noise Applications on the Bench, or in a Rack Test Station. The manual controls make it simple to operate with reduced test set up time. Standard units can be modifiedfor specific customer requirements. Please consult the factory for pricing and availability.
Home page PDF
NC346 Broadband Coaxial

NC346 Broadband Coaxial

The NC346 Noise Source is designed for precision noise figure measurements using a dedicated noise figure analyzer or a spectrum analyzer with noise figure capability. The module’s low VSWR increases noise figure measurement accuracy.
Home page PDF
DNG7500 Digital Noise Generator

DNG7500 Digital Noise Generator

Generates Pseudo-Random Noise and CW Signals for RF, Microwave, and Digital Applications . It can provide up to a 70 MHz wide RF output to emulate real-world noise and interference conditions. The user can create many complex waveforms, including digital notches, and burst pattern waveforms in the frequency domain. The large 8.4 “ color display contains unit block diagrams and tabular signal parameter values making the creation and storage of waveforms intuitive and efficient. The signals can be up-converted to your band of interest with an optional Local Oscillator and mixer. User created MatLAB data files can be imported for digital conversion and subsequent analog signal output. An optional dual channel output allows for cost effective ATE test systems
Home page PDF
RP-5300 Series

RP-5300 Series

2-Channel, 50 MHz Compact RF Recorder. The Averna RP-5310 and RP-5320 (1 and 2 channel) RF Recorders are advanced tools for both field testing and performance testing. With 50 MHz of recording bandwidth, it can record multiple GNSS signals in up to two bands (L1, L2, L5), such as GPS or GLONASS. Its compact size and integrated display make it ideal for easy field operation and its innovative engineering is designed to drive sophisticated applications.
Home page PDF
URT-5000 Software Defined RF Player and Signal Generator

URT-5000 Software Defined RF Player and Signal Generator

The Averna URT-5000 is a state-of-the-art RF signal source that utilizes Averna protocol-specific signal generation toolkits and signal libraries to generate and impair common Navigation and Broadcast Radio signals for receiver design validation, testing, production and support.
Home page PDF



Contact

Filling the information in this section is to permit the provision of promotional email updates
 

    Get eNews