Products

 
Low Cost Diplexer Filter, BK-10N

Low Cost Diplexer Filter, BK-10N

Microlab Model BK-10N is a Diplexer which allows combination and separation of the signals in 698 - 960 MHz and the 1710 - 2170 MHz wireless bands. To minimize band inter-reaction, the inputs are well isolated and have minimal insertion loss over their respective frequency bands. The Diplexer has been designed using passive, proprietary techniques which minimizes cost and size. At the same time it ensures minimal loss and very high reliability at input powers up to 20W per input. Powers to 250W per input, 7-16 mm connectors and ultra low PIM are available in the BK-20 series. (01/13)
Home page PDF
DAS Carrier Conditioners for Single & Multi Band / Multi Carrier DAS Applications

DAS Carrier Conditioners for Single & Multi Band / Multi Carrier DAS Applications

Microlab custom designs boxes that conveniently integrate passive components. A common example is the Combiner Box used at the Point of Interface between service providers and an In-Building Distributed Antenna system. Requirements commonly include the need to combine signals from public service channels or Tetra usually in the range from 380 to 520 MHz with cellular services extending from LTE 700 to WiMAX/LTE-2600, as well as other services up to 6 GHz.
Home page PDF
Power Splitters, Dx-69FN series

Power Splitters, Dx-69FN series

Microlab Model Dx-69FN series of Wilkinson style Power Dividers has been designed for low power applications where output isolation is preferable over lowest possible loss. The wide frequency range of this design allows use with multiband antennas and leaky cable systems. Lower loss dividers which enhance receive sensitivity and preserve transmitted power are available in the reactive splitters such as Dx-55FN and Dx-85FD series. (01/13)
Home page PDF
Low PIM Combiner, CT series

Low PIM Combiner, CT series

The models in the CTseries are assemblies of a broadband,high isolation Hybrid Coupler and a low PIM cable load using a single weatherproofed housing. The Combiner combines two wireless carriers in the band to a single antenna feed or distribution cable with minimum intermodulation. The cable load terminates one hybrid output port in 50Ω and results in a 3 dB loss in each signal. Other bands, connectors, guaranteed PIM and powers to special order. (01/13)
Home page PDF
VectorStar MS4640B

VectorStar MS4640B

Pulsed S-parameter and related measurements are critical for many common applications, including test of radar sub-systems and components. In addition, pulsed measurements are often necessary for on-wafer device characterization, where pulsed operation is required for thermal reasons. Historically engineers have often had to face several test challenges including: too many test method trade-offs; a need for better analysis tools; inability to monitor pulse behavior over long periods of time; the need to eliminate measurement setup errors; and, timing and synchronization issues
Home page PDF
BTS Master MT8220T

BTS Master MT8220T

The BTS Master MT8220T is Anritsu’s third generation high-performance handheld base station analyzer that has been specifically developed to advance the support for 4G wireless networks as well as installed 2G, 3G and WiMAX networks. The MT8220T provides 20 MHz bandwidth modulation quality for LTE eNobeB testing and is equipped with a high-contrast, touch screen display and backlit key panel making it simple to use in both bright sunlight and dim conditions. The BTS Master MT8220T Base Station Analyzer is the essential multi-function instrument for senior wireless technicians and RF engineers to accurately and quickly verify the installation and commissioning of base stations for optimal wireless network performance and for the on-going maintenance and troubleshooting to keep wireless network infrastructure fine-tuned. A standard three-year warranty demonstrates world-class reliability and brings peace-of-mind to owning and using the MT8220T BTS Master.
Home page PDF
BERTWave MP2100A

BERTWave MP2100A

The MP2100A is an all-in-one BERT and EYE/Pulse Scope solution for evaluating optical active devices in optical communication systems. To meet the need for the fastest possible measurement speeds on production lines for active optical devices, the Gating Time has been slashed by 90% compared to conventional BERT equipment using remote commands and the EYE/Pulse Scope function is 300% faster. In addition, measurement times are much shorter due to the simultaneous BER measurement and EYE pattern analysis.
Home page PDF
Signal Quality Analyzer-MP1800A

Signal Quality Analyzer-MP1800A

The MP1800A Signal Quality Analyzer is an expandable plug-in modular BERT with built-in Pulse Pattern Generator (PPG) supporting output of high-quality, high-amplitude signals, Error Detector (ED) with high input sensitivity supporting signal analysis, such as Bathtub Jitter and Eye Diagram Measurements, plus a jitter modulation source for generating various jitters, such as SJ/RJ/BUJ/SSC, and supporting Jitter Tolerance tests. The MP1800A supports wideband bit rates from 0.1 to 32.1 Gbit/s for versatile signal integrity analysis applications up to 32 Gbit/s, such as 100GbE (25G x 4), OTU-4 (28G x 4), 32G DP-QPSK, CEI-28G, 32G FC, and Infiniband EDR (26 G). Combination with the MP1821A and MP1822A supports BER tests up to 56 Gbit/s for next-generation R&D, including CEI-56G-VSR.
Home page PDF
Signal Analyzers-MS2690A

Signal Analyzers-MS2690A

MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution. The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.
Home page PDF
Spectrum Analyzer/Signal Analyzer MS2830A

Spectrum Analyzer/Signal Analyzer MS2830A

The MS2830A supports an optional vector signal generator (VSG) and can be used as a reference signal source for tests of parts Tx characteristics or as a signal source for tests of Rx characteristics. Installing the VSG option cuts investment costs and footprint size. The IQproducer PC software generates waveform patterns for the VSG, supporting various communication methods, including LTE FDD, LTE TDD (TD-LTE), Mobile WiMAX, etc. The analysis options up to 125 MHz can also be installed along with various measurement software tools supporting PC-free modulation analysis of various communication systems. For example, installing the LTE Downlink/Uplink Measurement Software and LTE IQproducer LTE supports Tx characteristics/modulation analysis for LTE FDD BTS and Rx characteristics tests.
Home page PDF
Signaling Tester-MD8475A

Signaling Tester-MD8475A

The MD8475A Signaling Tester is an all-in-one base station simulator supporting LTE FDD, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, and CDMA2000® 1X/1xEV-DO Rev. A. It supports service and call-processing tests for multimode LTE smartphones and mobiles with excellent cost-performance. A full line of test environments are supported for the general mobile verification phase, such as max. throughput performance tests, stress tests, and battery consumption tests of multisystem LTE mobiles using 2x2 MIMO, as well as CS-Fallback, call connection reliability and stability tests at handover, communication tests at low RF power, and service verification using LTE Multiple PDN and SMS in a 2-cell environment*. In addition, test conditions are easily set using the SmartStudio GUI, helping cut test environment configuration time.
Home page PDF
Network Master MT9090A

Network Master MT9090A

The new, palm-size MT9090A modular platform from Anritsu finally addresses all of these needs. Users can interchange different modules to configure the MT9090A as an optical fault locator, general purpose OTDR, CWDM optical channel analyzer or 10/100/1000MB Ethernet tester. Operation is quite similar between modules so the user is immediately familiar with operation. Small but Capable Despite its small size, the MT9090A does not compromise performance or features. With a high resolution indoor/outdoor display, excellent optical performance, innovative features and expandable modular design, the MT9090A Network Master is clearly in a different class than most other "handheld testers".
Home page PDF
TOTOKU TCF Series

TOTOKU TCF Series

Flexible,The World First 110GHz Application,Mating Flexibility,Lower Attenuation,Lower Reflective Characteristic,Solid Phase Stability over Temperature and,Bending,The TCF series cables can also be used for ultra high-speed,digital signal transmission.
Home page PDF
RF Power Indicator

RF Power Indicator

Use the MA25100A RF Power Indicator to determine if a connector is "live" with RF power that could damage sensitive measuring equipment. Mate the MA25100A to the connector in question and it will indicate the presence of high-level RF: Yellow LED if RF > +17 dBm (50 mW) or Red LED if RF > +27 dBm (500 mW). The MA25100A can withstand RF power levels up to +50 dBm (100 W) from a 50 Ω source. The MA25100A has a very high VSWR and should not be used as a 50 Ω termination. The MA25100A is always on and always ready. Its self-contained battery can last for years with normal use and is field-replaceable. A "self-test" button lights both indicators (red and yellow) if internal circuits and battery are functioning.
Home page PDF
Microwave Site Master™-S820E

Microwave Site Master™-S820E

Cable & Antenna Analyzer-Anritsu is proud to introduce the world’s most advanced Site Master. With microwave frequency coverage up to 40 GHz,the new S820E completely redefines the standards for portable handheld analyzers, setting another new industry benchmark for performance and accuracy. The new S820E is the culmination of over 50 years of microwave development, utilizing the very latest technologies to deliver accuracy and performance previously reserved only for benchtop instruments. Based on a true 4 channel receiver design, the S820E offers true VNA performance in a portable package.
Home page PDF
40 GHz USB Transmission Sensor SC8268

40 GHz USB Transmission Sensor SC8268

A new, 40 GHz USB Transmission Sensor, model SC8268, has been developed to provide full frequency range support for the 2-port cable loss measurement (also referred to as: Transmission measurement with external sensor) for the S820E series Microwave Site Master. This new sensor operates from 1 MHz to 40 GHz and has a K(m) connector type. The measurement range is from 0 dBm to -50 dBm.
Home page PDF



Contact

Filling the information in this section is to permit the provision of promotional email updates
 

    Get eNews