Products

 
Cell Master™-MT8212E

Cell Master™-MT8212E

The MT8212E Cell Master™ Base Station Analyzer is the smallest, lightest, and most economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing. It's ideal for installation and commissioning as well as for maintenance and troubleshooting. This optimal combination of base station test capabilities in one handheld device eliminates the need for several independent test instruments, thereby reducing the number of tools the user must carry and learn to operate. Whether it's sweeping cables, making power measurements, finding interference, troubleshooting base station signal quality, or verifying backhaul performance, the Cell Master MT8212E is the ideal all-in-one instrument to help keep your network up and running.
Home page PDF
ACCESS Master MT9083A2

ACCESS Master MT9083A2

The ACCESS Master MT9083A2 features a 7-inch widescreen TFT-LCD display for use both indoors and outdoors, enhanced battery operation time (up to 12 hours) increased operating temperature range (-10° to 50°C) and new short-cut function keys. Until now, installing and maintaining optical networks required technicians to carry a variety of equipment which was not only cumbersome, but also expensive. Hearing this common complaint, Anritsu engineers have developed their new line of MT9083 ACCESS Master OTDRs. The MT9083A2 test sets are designed to make your measurement experience simple and error-free with true one-button fault location, pass/fail classification, automated file saving and naming and even a macrobend detection feature for identifying installation issues. They feature multiple wavelengths and options to satisfy any network testing requirement: access or metro, FTTx or LAN...all without straining your budget.
Home page PDF
Universal Wireless Test Set MT8870A

Universal Wireless Test Set MT8870A

The MT8870A Universal Wireless Test Set is a test instrument from Anritsu that has been specifically designed for high volume manufacturing test of all common cellular and short range wireless technologies. An MT8870A instrument mainframe can contain up to four MU887000A TRX Test modules (10 MHz to 6 GHz*1). Each module has an integrated Vector Signal Generator (VSA) and Vector Signal Analyzer (VSA) to perform DUT transmitter and receiver tests. The MT8870A that has the MU887000A test module is able to control with an external PC to perform RF testing.
Home page PDF
Signaling Tester MD8430A

Signaling Tester MD8430A

Wireless devices are evolving quickly into multimedia smartphones with fast data connections due to widespread deployment of high-speed standards, such as LTE. The MD8430A Signalling Tester is a key LTE base station simulator for developing 3GPP LTE/LTE-Advanced compliant chipsets and wireless devices. In addition to verifying normal communications procedures, it supports fault operation tests, which are difficult to perform at connection with live base stations. It also supports LTE terminal R&D and verification tests under various conditions. Based on extensive experience in 3G markets, Anritsu has developed the MD8430A as a powerful LTE protocol/R&D test solution to help developers bring LTE wireless devices to market as soon as possible.
Home page PDF
Series ShockLine™ Economy Vector Network

Series ShockLine™ Economy Vector Network

The MS46322A is a family of four new Economy ShockLineTM Vector Network Analyzers from Anritsu. The Economy ShockLineTM lineup consists of low-cost, 2-port, 10 MHz to 8 GHz, 20 GHz, 30 GHz, and 40 GHz VNAs in a compact and rugged 2U chassis. The MS46322A family supports SCPI command programming and has software driver support for the most common programming environments. All of the ShockLineTM family VNAs use industry standard LAN communications for robust remote control in production test environments. The MS46322A series also provides a powerful graphical user interface when attached to a user-supplied monitor, keyboard, and mouse. The full-featured user interface enables manual testing of passive devices in production and also makes developing and troubleshooting automated test programs easier.
Home page PDF
Propsim® F8Radio Channel Emulator

Propsim® F8Radio Channel Emulator

Versatile solution forall radio channel emulation needs• Propsim® F8 is the only radio channel emulator on the market that is designed for testing terrestrial as well as aerospace and satellite devices and systems• Ready for testing any existing LTE, LTE-Advanced, TD-LTE, WCDMA, HSPA+, GSM, TD-SCDMA, EV-DO / CDMA2000, TETRA, IS-54, WiMAX and Wi-Fi radio interfaces and any known future wireless system air interfaces• Seamless frequency range up to 220 – 6000 MHz with 40 MHz, 80 MHz or 125 MHz signal bandwidth option
Home page PDF
LMR Master Land Mobile Radio Modulation Analyzer S412E

LMR Master Land Mobile Radio Modulation Analyzer S412E

The LMR Master S412E is Anritsu's second generation solution for installing and maintaining public safety systems. Built on Anritsu's ninth generation handheld platform, the LMR Master combines a high performance receiver / spectrum analyzer with the world's most advanced handheld vector network analyzer plus a CW / P25 (Phase 1 & Phase 2) / NXDN™ / ETSI DMR / MotoTRBO™ signal generator with internally adjustable power from 0 dBm to –130 dBm. The LMR Master S412E is the ideal instrument for Land Mobile Radio (LMR) and Public Safety System technicians and engineers engaged in field testing the RF performance of P25, P25 Phase 2 (TDMA), NXDN™, ETSI DMR, MotoTRBO™, and 700 MHz LTE public safety radio systems in the Part 90 spectrum allocations. In addition the LMR Master offers support for emerging Positive Train Control systems.
Home page PDF
Miniflex™ Outdoor Microduct

Miniflex™ Outdoor Microduct

Miniflex™ Outdoor Microduct is a microduct for the routing of cables and optical fibres wherever there is a need for a UV stable product, such as outdoors. Miniflex™ Outdoor Microduct is identical to Miniflex™ Indoor Microduct except that it is made from a tough UV stable PE polymer. Miniflex™ Outdoor Microduct has a low-friction & low static DVC™ lining to assist in pulling, blowing and pushing of fibre or cable.
Home page PDF
Miniflex™ Indoor Microduct

Miniflex™ Indoor Microduct

Miniflex™ Indoor Microduct is a microduct for the routing of cables and optical fibres within buildings.Miniflex™ Indoor Microduct is made from a flame retardant, Low Smoke Zero Halogen polymer making it suitable to use indoors in the event of fire (EU only). Miniflex™ Indoor Microduct has a low-friction & low static DVC™ lining to assist in pulling, blowing and pushing of fibre or cable.
Home page PDF
TuffDuct™ Direct Buried Microduct

TuffDuct™ Direct Buried Microduct

uffDuct™ is a 10mm microduct for the routing of cables and optical fibres underground and is ultra tough. TuffDuct™ is suitable for direct bury deployment and is available with a tone-wire if required for locating purposes.OD 10mm x ID 6mm 49.1Kg/Km 2000N/450lbf Crush Resistance
Home page PDF
Miniflex™ Fibre Cable

Miniflex™ Fibre Cable

Miniflex™ Fibre Cable is a flexible fibre optic cable made from crush resistant durable polymer. Miniflex™ Fibre Cable has exceptionally low weight for the level of strength and protection it provides. Miniflex™ Fibre Cable is available with many different counts & types of fibre and is suitable for installation using blowing, pulling and pushing techniques
Home page PDF
Miniflex™ Plenum Cable

Miniflex™ Plenum Cable

Indoor Plenum rated fibre cable available with 2-24 fibres. Industry standard 250 micron Singlemode and Multimode. Tough yet flexible Miniflex™ Plenum Cable can be easily routed in tight areas. The compact and light weight properties are suitable for routing in trays and racks and the cables anti-kink properties makes handling the optical fibre much safer. The cable also provides protection in areas where optical fibre is exposed to human contact, Miniflex™ picks up where your armoured cable ends and continues to provide end to end to end Optical Fibre Protection. Available terminated or unterminated.
Home page PDF
Miniflex™ Pre-terminated Fibre Cable

Miniflex™ Pre-terminated Fibre Cable

Miniflex™ Pre-terminated Fibre Cable, made using Miniflex™ Fibre Cable with your choice of industry standard connector.Miniflex™ Pre-terminated Fibre Cable has exceptionally low weight for the level of strength and protection it provides.
Home page PDF
Miniflex™ Fibre Cable – QuikPush

Miniflex™ Fibre Cable – QuikPush

Miniflex™ Fibre Cable - QuikPush is made from crush resistant hard plastic, designed to allow pre-terminated cable to be routed in the field without the need for a splice. QuikPush connectors use a slimline, pushable pre-terminated ferrule with a self-assembly SC Connector. Quick and easy to assemble, it requires no expensive equipment or messy splices. The Miniflex™ cable ensures the fibre is fully protected yet ultra flexible.
Home page PDF
Frequency Multipliers

Frequency Multipliers

Phase Matrix’s custom, high-performance frequency-multiplier modules use state-of-the-art MMICs, discrete devices, and filters to achieve the desired multiplication ratio, power output, and spurious performance. Custom narrowband and wideband multipliers up to 67 GHz are available upon request. - See more at: http://www.phasematrix.net/phasematrix/products/microwave-components#sthash.JIacdJ8d.dpuf
Home page PDF
Narrowband VCOs

Narrowband VCOs

Phase Matrix’s custom line of narrowband, broadband, and fixed-tuned VCOs employ high-performance silicon bi-polar junction transistors (Si BJTs) to achieve very low phase noise. The use of hyper-abrupt silicon varactor diodes enables tuning capability, and GaAs MMIC buffer amplifiers provide the necessary power output and load isolation of the oscillators. VCOs are available in frequencies up to 67 GHz in TO-8, TO-8 surface mount, connectorized SMA output type packages, or other custom-designed housing.
Home page PDF



Contact

Filling the information in this section is to permit the provision of promotional email updates
 

    Get eNews