Products

 
Low Noise Amplifier Testing Challenges

Low Noise Amplifier Testing Challenges

Anritsu VectorStar Brings Industry First 125 GHz VNA NF Measurement Capability. Designers, modelers, and manufacturers of RF and microwave frequency amplifiers used in applications such as radar, wireless communication, or high-speed digital communication systems at either the wafer-level or as a packaged part face many test challenges. Higher performance requirements in the face of tighter budgets and more demands on test engineer time result in the need for test systems which provide technical leadership while remaining cost effective, easy to use, and flexible.
Home page PDF
MG3710A-Vector Signal Generator

MG3710A-Vector Signal Generator

The MG3710A is a vector signal generator with 6-GHz upper frequency limit and 120-MHz wide RF modulation baseband generator. It outputs various radio systems signals for cellular communications, such as LTE FDD/TDD, W-CDMA, GSM as well as narrowband communications, such as WLAN, WiMAX, Bluetooth and GPS.
Home page PDF
MS4640B-VectorStar

MS4640B-VectorStar

The VectorStar™ family is Anritsu's Premium VNA line, providing the highest overall performance on a modern platform. The MS4640B VectorStar VNA offers the broadest coverage in a single instrument, 70 kHz to 70 GHz. The additional two decades at the low end are even more impressive than the guaranteed 70 GHz coverage on the high end. PulseView™, when combined with the innovative IF digitizing option, offers industry-leading 2.5 ns pulse resolution and 100 dB dynamic range with no compromises or trade-offs due to varying duty cycles. PulseView provides real time display of pulse measurements while dynamically modifying pulse parameters for immediate design validation.
Home page PDF
MT9090A-Network Master Series

MT9090A-Network Master Series

The new, palm-size MT9090A modular platform from Anritsu finally addresses all of these needs. Users can interchange different modules to configure the MT9090A as an optical fault locator, general purpose OTDR, CWDM optical channel analyzer or 10/100/1000MB Ethernet tester. Operation is quite similar between modules so the user is immediately familiar with operation. Despite its small size, the MT9090A does not compromise performance or features. With a high resolution indoor/outdoor display, excellent optical performance, innovative features and expandable modular design, the MT9090A Network Master is clearly in a different class than most other "handheld testers".
Home page PDF
MD8475A-Signalling Tester

MD8475A-Signalling Tester

The MD8475A Signalling Tester is an all-in-one base station simulator supporting LTE FDD, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, and CDMA2000® 1X/1xEV-DO Rev. A. It supports service and call-processing tests for multimode LTE smartphones and mobiles with excellentcost-performance. Supports combination of LTE/LTE, LTE/W-CDMA, LTE/GSM and LTE/CDMA2000; requires two MD8475A units for testing LTE/CDMA2000.
Home page PDF
MP1800A-Signal Quality Analyzer

MP1800A-Signal Quality Analyzer

The MP1800A Signal Analyzer offers various modules and options for customizing functions to requirements. Functions are easily extended by adding modules and options to support new future needs. This guide will help you select the best configuration matching needs by describing functions, selections and combinations of modules and options.
Home page PDF
EB Tough VoIP Feild Phone

EB Tough VoIP Feild Phone

Elektrobit has developed a tactical communication solution which provides last-mile broadband wired IP connectivity for data and integrated voice (VoIP) services. With the EB Tough VoIP, users can utilize all IP connectivity even in the most difficult environments. The system can be seamlessly integrated to the existing IP infrastructure.
Home page PDF
Noisecom CNG-EBNO

Noisecom CNG-EBNO

The instrument sets, and maintains a highly accurate ratio between a user supplied carrier and internally generated noise, over a wide range of signal power levels and frequencies. The internal power meter provides repeatable SNR waveforms for accurate signal generation. The instrument gives system, design, and test engineers in the telecommunications industry a single tool to generate precision signal to noise ratios. These signals are used to compare theoretical BER to SNR ratios, found in “waterfall” type graphs, with measured values from the DUT to evaluate different modulation schemes. Users can obtain higher yield through automated testing, plus increased confidence from repeatable, accurate test results. Standard units can be modified for specific customer requirements. Please consult the factory for pricing and availability.
Home page PDF
Chambers systems

Chambers systems

QuadBox is suitable for use in all types of buried networks and utilities. It is ideally suited to telecom networks and is the first modular joint box system to be approved by BT for use in its national network. QuadBox can be used for both new build and retrofit. The modular design of QuadBox makes it perfect for retrofitting on existing ducted networks. Chambers can also be benched to avoid existing services and duct entries can be cut in any location.
Home page PDF
MiniGlide

MiniGlide

MiniGlide is the ideal solution for housing backbone and feeder cables where initial fibre count is high and compliments MicroGlide microtubing which is generally used to connect the final section to the end user. Designed for use with mini-cable (up to 144 fibre) it offers high fibre capacity and allows fibre to be blown in as and when required, providing vast expansion scalability with minimal initial investment.
Home page PDF
A178-Hand-Held Core-Alignment Fusion Splicer

A178-Hand-Held Core-Alignment Fusion Splicer

The A178 is new state-of-art core alignment product in the Fitel S17x series. It is equipped with newly developed optical alignment system that cuts the entire splicing time by 20%. It also incorporates an improved heating mechanism, which shortens the protection sleeve shrinking time by more than 30%. The new battery system can provide splicing cycle (splicing/heating) up to 200 without additional attached battery unit. The rubber protection corners and metal body frame make this unit very rugged, robust and strong. Finally the size of this new unit is much smaller compared to its previous models and weight is also significantly reduced.
Home page PDF
NC6000A/8000A Series

NC6000A/8000A Series

The NC6000/8000A Series Noise Generators are Manually Operated for the RF Benchtop Designed for General-Purpose Broadband Noise Applications on the Bench, or in a Rack Test Station. The manual controls make it simple to operate with reduced test set up time. Standard units can be modifiedfor specific customer requirements. Please consult the factory for pricing and availability.
Home page PDF
NC346 Broadband Coaxial

NC346 Broadband Coaxial

The NC346 Noise Source is designed for precision noise figure measurements using a dedicated noise figure analyzer or a spectrum analyzer with noise figure capability. The module’s low VSWR increases noise figure measurement accuracy.
Home page PDF
DNG7500 Digital Noise Generator

DNG7500 Digital Noise Generator

Generates Pseudo-Random Noise and CW Signals for RF, Microwave, and Digital Applications . It can provide up to a 70 MHz wide RF output to emulate real-world noise and interference conditions. The user can create many complex waveforms, including digital notches, and burst pattern waveforms in the frequency domain. The large 8.4 “ color display contains unit block diagrams and tabular signal parameter values making the creation and storage of waveforms intuitive and efficient. The signals can be up-converted to your band of interest with an optional Local Oscillator and mixer. User created MatLAB data files can be imported for digital conversion and subsequent analog signal output. An optional dual channel output allows for cost effective ATE test systems
Home page PDF
RP-5300 Series

RP-5300 Series

2-Channel, 50 MHz Compact RF Recorder. The Averna RP-5310 and RP-5320 (1 and 2 channel) RF Recorders are advanced tools for both field testing and performance testing. With 50 MHz of recording bandwidth, it can record multiple GNSS signals in up to two bands (L1, L2, L5), such as GPS or GLONASS. Its compact size and integrated display make it ideal for easy field operation and its innovative engineering is designed to drive sophisticated applications.
Home page PDF
URT-5000 Software Defined RF Player and Signal Generator

URT-5000 Software Defined RF Player and Signal Generator

The Averna URT-5000 is a state-of-the-art RF signal source that utilizes Averna protocol-specific signal generation toolkits and signal libraries to generate and impair common Navigation and Broadcast Radio signals for receiver design validation, testing, production and support.
Home page PDF
Matrix™ Joint Closures

Matrix™ Joint Closures

Protective joint closures which enable point-to-point tube connections. Tubes can be connected in a straight line or branch-off using Push-Fit Connectors and fibre can then be blown in as required, through to the end user without interruption/splicing.
Home page PDF
EB Tough VoIP Network Extender

EB Tough VoIP Network Extender

EB is targeting system integrators, original equipment manufacturers and technology vendors in the defense and public safety markets to help them expand their product portfolios. The products are offered both under the EB brand as well as white label for customer branding. In addition, EB offers flexibility in customizing the functionality to better meet different customer-specific requirements
Home page PDF
RFeye Array 300

RFeye Array 300

The RFeye Array 300 is a fully integrated multi-mission system for continuous 24/7 spectrum monitoring and surveillance. It is designed to intercept signals - however transient, perform signals analysis and classification and quickly and reliably geolocate target transmitters, all in real time. It is the smaller of the family of RFeye Arrays and is ideal for most critical site and border monitoring applications.
Home page PDF
S325A Hand-Held High Precision Cleaver

S325A Hand-Held High Precision Cleaver

S325A Hand-Held High Precision Cleaver-Features:One-step action,Cleave anywhere- in your palm or on your desktop, Easy fiber loading ,Simple operation, High capacity waste fiber collection, Durable design, Easy Maintenance on-site
Home page PDF
Mini C2™ Cable

Mini C2™ Cable

The Mini C2™ Cable is size-optimized for a maximum of 12 fi bers to help minimize deployment costs. This small and lightweight, yet highly durable cable offers easy installation and handling while providing additional protection in the demanding outside plant (OSP) environment. To construct the Mini C2 Cable, one to twelve optical fi bers are placed within a 3 mm gel-fi lled central tube. An overlapping layer of electrolytically chromecoated, corrugated steel (ECCS) armor then envelopes the central tube.
Home page PDF
PowerGuide® TTH Cable

PowerGuide® TTH Cable

The OFS PowerGuide® TTH All-Dielectric Self-Supporting (ADSS) Loose Tube Fiber Optic Cable offers an excellent choice for short aerial cable spans ranging up to 346 feet (105 meters)*. This cable’s compact size, low-cost installation and specialized design make it an ideal, cost-effective cabling solution for duct, Fiber-to-the- Home (FTTH) and short-span, self-supporting aerial drop applications.
Home page PDF
RFeye Node

RFeye Node

The RFeye Node sets the new standard for high performance, cost-effective, real time 24/7 monitoring of the radio spectrum. It has been designed and packaged to enable flexible and scalable deployments in remote distributed networks. With built-in intelligence, the RFeye can operate both autonomously and in cooperation with other nodes in the network.
Home page PDF
EZ bend-Assemblies Factory Terminated

EZ bend-Assemblies Factory Terminated

The robust, leading-edge EZ-Bend® Assemblies offer all the advantages of bend-insensitive EZ-Bend Cables plus the benefifi ts of factory-tuned termination. OFS’ EZ-Bend Assemblies allow for customization (i.e, cable diameter and construction, cable length, and termination type) and help save time and money on installation. Their innovative design can conquer sharp corners, moldings, and even stapling, and provides an ideal solution for MDU and in-home wiring applications where space is at a premium.
Home page PDF
25B

25B

The 25B and 28B CW frequency counters from Phase Matrix, Inc are the ideal counters for communications applications. These portable, rugged units combine durability and small size with high performance features typically found only in larger, bench-top instruments. The 25B measures CW, FM and AM frequencies from 10 Hz to 20 GHz, and the 28B extends that range up to 26.5 GHz
Home page PDF
Elektrobit (EB) launches EB Gigabit PoE+ Injector

Elektrobit (EB) launches EB Gigabit PoE+ Injector

Providing high speed data and electrical high power connection for devices used in tactical military environments. Elektrobit (EB) has launched a new product called EB Gigabit PoE+ Injector that provides high data speed and high power connections for devices and communication equipment. The EB Gigabit PoE+ Injector combines data and power supply over a single Ethernet cable and is very easy to install. The product is fully MIL compliant and has been designed for demanding military environments. EB Gigabit PoE+ Injector is especially well suited for high vibration environments like vehicle installations.
Home page PDF
RFeye Nexus

RFeye Nexus

The RFeye Nexus radio is based on CRFS’s latest high performance superheterodyne receiver design. The excellent noise figure and spurious levels enable the receiver to distinguish even very low power signals from the noise floor and thus to find transmissions that might be missed by other systems. The radio sweeps at up to 150 GHz/s with excellent noise characteristics for reliable capture of all signals, including short-burst events.
Home page PDF
DryBlock®Cable Light Armor

DryBlock®Cable Light Armor

The OFS DryBlock® Light Armor Loose Tube Cable has long been a popular cabling solution for outside plant (OSP) applications, including duct, lashed aerial,and direct buried installations in harsh environments. Corrugated steel armor and a robust polyethylene (PE) jacket combine to deliver rugged durability and added rodent resistance in an RDUP-listed cable that remains lightweight, fl exible, and easy to install.
Home page PDF
PIM Master™MW82119B

PIM Master™MW82119B

PIM Master™ B-series is a 40 Watt, battery-operated PIM analyzer featuring Site Master™ line sweep capability. With the Site Master option included, the PIM Master is able to fully certify cable and antenna system performance, measuring PIM, Distance-to-PIM, Return Loss, VSWR, Cable Loss and Distance-to-Fault with a single test instrument. PIM Master includes a large, outdoor viewable display and intuitive user interface that is optimized for field conditions. PIM Master’s rugged design and enhanced portability enables both PIM and line sweep testing at the “top-of-the-tower,” helping operators to achieve maximize RF performance from their LTE Remote Radio Head (RRH) installations.
Home page PDF
MS2038C-VNA Master+Spectrum Analyzer

MS2038C-VNA Master+Spectrum Analyzer

The Anritsu VNA Master MS2038C is the industry's highest performance, handheld solution for 2-port, 2-path measurements, anytime, anywhere. It specifically addresses complex cable and antenna measurement needs in the field with accurate, vector corrected 2-port magnitude, phase, and Distance Domain measurements. MS2038C covers a frequency band from 5 kHz to 20 GHz, which contains a wide variety of radio frequency communications systems, and also many radars and microwave communications systems, both coax and waveguide.
Home page PDF
MS2720T-Spectrum Master™

MS2720T-Spectrum Master™

Anritsu's latest generation of handheld spectrum analyzers is the MS2720T Spectrum Master. This represents the company's highest performance handheld spectrum analyzer. Exciting new features and options bring more value and speed to the user.Frequency Coverage: 9 kHz to 43 GHz,Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB Three Sweep Modes: improved sweep speed, up to 100 times faster Resolution and Video Bandwidths from 1 Hz to 10 MHz New triggering choices, including hysteresis, hold-off, and delay More zero-span capabilities including 10 MHz RBW & VBW Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice Choice of display options for readability: normal, black and white, night vision, or high contrast On screen Interference Mapping as part of the Interference Analysis option LTE Measurements up to 20 MHz 30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal Burst detect captures 200 μs bursts the first time, every time
Home page PDF
FOX Home Run Solution

FOX Home Run Solution

Announcing the Home Run Solution at FTTH V-Linx FDH and 400 LIU Connectorized MiniCord Breakout EZ-Bend 12 fiber white cable SlimBox at Living Unit Entrance InvisiLight Solution Inside the Living Unit MDU Solution Alternatives Utilization of the SlimBox Products
Home page
UFX EbNo SNR Noise Generator

UFX EbNo SNR Noise Generator

The UFX-EbNo is a fully automated precision signal to noise generator that sets, and maintains a highly accurate ratio between a user supplied carrier and internally generated noise, over a wide range of signal power levels and frequencies. The internal power meter provides repeatable SNR waveforms for accurate signal generation.
Home page PDF
RF/Microwave-Signal Generators

RF/Microwave-Signal Generators

RF/Microwave Signal Generator,0.1 Hz to 70 GHz/500 GHz. The MG3690C is the "ideal microwave signal generator" because it offers unsurpassed frequency coverage, the lowest phase noise, leveled output power, spectral purity, switching speed, modulation performance, size, upgradeability, reliability, and service. Our signal generators are configurable for a broad range of applications from R&D to manufacturing and depot repair. Anritsu provides you a total solution including proven reliability and standard 3 year warranty plus pre- and post-sale support that is the best in the industry
Home page PDF
21 dBi, 65°, 0-6°, Quad Port Antenna

21 dBi, 65°, 0-6°, Quad Port Antenna

CellMax offers the most compact Quad Port, 21 dBi, 65° antenna, 0-6° variable tilt, (1710-2170MHz) on the market, only 2,0m in length. Thanks to superior energy efficiency in the antenna, energy losses are close to zero, which maximizes gain while maintaining all radio pattern parameters intact. This includes fully maintained USLS throughout the full tilt range.
Home page PDF
RFeye Evaluation System

RFeye Evaluation System

The RFeye Evaluation System is the ideal entry-level system for users wanting to trial the extensive capabilities of the RFeye Node. It contains everything required for quick and easy set up of the Node for data logging and/or real-time monitoring. It includes evaluation software that enables powerful mapping and analysis of logged data as well as in live monitoring mode using the real-time spectrum analyzer interface.
Home page PDF
XCAL-AUTO

XCAL-AUTO

XCAL-Auto is an unattended, remote controlled system that automates subscriber-based data collection. It supports almost all smartphones and tablets available on the market today, giving you a real life view of what subscribers actually see and hear in the network (including the use of all major applications like web-surfing etc).With the XCAL-Auto system a number of products can seamlessly gel to form an enterpriselevel,subscriber-centric QoS solution. Simply by installing various kinds of clients such as XCAL, XCAL-P8E and XCAL-Mobile (iPhone, Android based phone etc.)
Home page PDF
XCAL-MO

XCAL-MO

XCAL-MO is a hardware platform proven to significantly improve your operational efficiency. Users can connect up to 20 handsets to XCAL-MO, which then automatically calls the network. The subsequent data can be recorded and displayed - and used to calibrate and optimise overall network performance.
Home page PDF
21 dBi, 65°, 0-6°, High Efficiency

21 dBi, 65°, 0-6°, High Efficiency

CellMax offers the only true 21 dBi, 65°, 0-6° tilt antenna (1710-2170MHz) on the market, only 2-meter in length. Our patented technology eliminates energy losses in the antenna, which means that it deliver maximum gain while maintaining all other parameters intact. This includes both radio pattern stability as well as fully maintained USLS throughout the full tilt range.
Home page PDF
MS9740A-Optical Spectrum Analyzer

MS9740A-Optical Spectrum Analyzer

The MS9740A is a benchtop optical spectrum analyzer covering 600 nm to 1750 nm. The MS9740A offers high-performance optical resolution and high-speed measurements to support the needs of device and component manufacturers. Waveform data can be measured and transmitted to external control equipment within 0.2s -- a 5x improvement over previous Anritsu models. This enables optical device manufacturers to reduce costs and time for testing and analysis by: •Improving sweep speed (measurement time), and •Accelerating data transfer to control equipment after measurement Combine these overall improvements with the ability to do basic analysis, and the result is excellent return on investment and improved productivity.
Home page PDF
VNA Master™

VNA Master™

The VNA Master™ MS202xB/3xB series is a compact handheld multi-function instrument that offers a portable yet powerful vector network analyzer, allowing you to do S-parameter analysis in the field ― anytime, anywhere. The MS203xB models also offer a high-performance spectrum analyzer with industry-leading ultra-low noise floor. Based on Anritsu’s 9th generation handheld platform, the VNA Master offers unmatched measurement breadth, depth, and precision; reducing the number of different tools needed to analyze modern communication systems in the field, on a tower, on a flightline, or in a vehicle.
Home page PDF
Microwave USB Power Sensors

Microwave USB Power Sensors

MA24108A, True-RMS, 10 MHz to 8 GHz MA24118A, True-RMS, 10 MHz to 18 GHz MA24126A, True-RMS, 10 MHz to 26 GHz Low Cost, Compact, and Highly Accurate Power Sensors for RF and Microwave Applications
Home page PDF
FURUKAWA-Ni-Ti Tubes for Medical Devices

FURUKAWA-Ni-Ti Tubes for Medical Devices

Furukawa Ni-Ti Tube has been selected for many medical devices such as Stents. Available in wide range of sizes with the strict OD & ID dimensions throughout the length assuring the tight WT uniformity to meet different requirements for various customers. Furukawa has unique vacuum melting and production lines. The most durable (good fatigue life) alloys available in the market are manufactured through fine control of the disperse of inclusions. Our alloy conforms with ASTM F 2063, the Ni-Ti alloy standard for medical devices.
Home page PDF
Special Fibers

Special Fibers

SPD has many options for coating, buffer, and cabling materials,and we have the expertise to combine them into a unique solution for your application. Our product design experts help guide you through the options that will best meet your requirements.
Home page PDF
Wideband Peak Power Meter ML2496A

Wideband Peak Power Meter ML2496A

High resolution wide bandwidth power meter and sensor for radar, 3G, and 4G wireless applications.The ML2496A Peak Power Meter has been designed for high resolution measurements on radar and the latest 3G and 4G wireless systems, including next-generation systems based on complex new modulation technologies such as OFDM. They have the highest bandwidth and highest resolution in rising edge pulse measurements. A combination of an advanced sampling system and measurement features provides precise and accurate details on the transmitter's power envelope. High quality CW measurement ability compatible with a wide range of sensors adds to their uniqueness by making them universal, with all-purpose flexibility.
Home page PDF
Site Master Broadband Cable & Antenna Analyzer

Site Master Broadband Cable & Antenna Analyzer

Site Master S810D covering 2 MHz to 10.5 GHz, and S820D covering 2 MHz to 20.0 GHz, are the most accurate, reliable and convenient microwave transmission line and antenna analyzers available for installation, verification, troubleshooting, and repair of microwave communication systems. An "anytime, anywhere" solution designed for the rugged challenges faced by field technicians working with wireless and defense communications systems.Standard measurement capabilities includes VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis, using frequency domain reflectometry (FDR) technology. Patented RF interference rejection enables accurate measurements in the presence of high RF activity. Both coaxial and waveguide connections are supported. Handheld Software Tools (HHST) is a free data analysis software utility that enables assessment of system trends, problems, and performance in addition to professional report generation.
Home page PDF
VNA Master MS2036A

VNA Master MS2036A

For field engineers and technicians who need all essential RF measurements anytime and anywhere, the MS2036A VNA Masters are the first and only truly portable handhelds with integrated 2-port vector network analyzer from 2 MHz to 6 GHz, spectrum analyzer from 9 kHz to 7.1 GHz, and power meter capabilities in a single instrument. Ideally suited for aerospace and defense application, the VNA Master offers valuable measurement capabilities that can replace obsolete instruments and improve operator mobility. In this way, field engineers and technicians can more quickly install, deploy, and maintain RF systems in the field. VNA Master is also an excellent solution for low-cost manufacturing and other general purpose applications given the broad frequency coverage, excellent performance, and integrated capabilities.
Home page PDF
JV9000 Adjustable Vcc Noise Generator for PSRR Analysis

JV9000 Adjustable Vcc Noise Generator for PSRR Analysis

Noise on Ground and Vcc traces is becoming an increasing concern of component designers, manufacturers and system users. Whether developing or operating highly accurate PLL or clock circuits, A/D D/A converters and other linear analog circuits for precision operations or such that are reliant on precise threshold functions, Ground and VCC noise can significantly influence overall system functionality. Even high-speed digital circuits are not immune against this kind of noise and should be tested for Ground and VCC noise related effects on data jitter and data integrity.
Home page PDF
Low Cost Diplexer Filter, BK-10N

Low Cost Diplexer Filter, BK-10N

Microlab Model BK-10N is a Diplexer which allows combination and separation of the signals in 698 - 960 MHz and the 1710 - 2170 MHz wireless bands. To minimize band inter-reaction, the inputs are well isolated and have minimal insertion loss over their respective frequency bands. The Diplexer has been designed using passive, proprietary techniques which minimizes cost and size. At the same time it ensures minimal loss and very high reliability at input powers up to 20W per input. Powers to 250W per input, 7-16 mm connectors and ultra low PIM are available in the BK-20 series. (01/13)
Home page PDF
DAS Carrier Conditioners for Single & Multi Band / Multi Carrier DAS Applications

DAS Carrier Conditioners for Single & Multi Band / Multi Carrier DAS Applications

Microlab custom designs boxes that conveniently integrate passive components. A common example is the Combiner Box used at the Point of Interface between service providers and an In-Building Distributed Antenna system. Requirements commonly include the need to combine signals from public service channels or Tetra usually in the range from 380 to 520 MHz with cellular services extending from LTE 700 to WiMAX/LTE-2600, as well as other services up to 6 GHz.
Home page PDF
Power Splitters, Dx-69FN series

Power Splitters, Dx-69FN series

Microlab Model Dx-69FN series of Wilkinson style Power Dividers has been designed for low power applications where output isolation is preferable over lowest possible loss. The wide frequency range of this design allows use with multiband antennas and leaky cable systems. Lower loss dividers which enhance receive sensitivity and preserve transmitted power are available in the reactive splitters such as Dx-55FN and Dx-85FD series. (01/13)
Home page PDF
Low PIM Combiner, CT series

Low PIM Combiner, CT series

The models in the CTseries are assemblies of a broadband,high isolation Hybrid Coupler and a low PIM cable load using a single weatherproofed housing. The Combiner combines two wireless carriers in the band to a single antenna feed or distribution cable with minimum intermodulation. The cable load terminates one hybrid output port in 50Ω and results in a 3 dB loss in each signal. Other bands, connectors, guaranteed PIM and powers to special order. (01/13)
Home page PDF
VectorStar MS4640B

VectorStar MS4640B

Pulsed S-parameter and related measurements are critical for many common applications, including test of radar sub-systems and components. In addition, pulsed measurements are often necessary for on-wafer device characterization, where pulsed operation is required for thermal reasons. Historically engineers have often had to face several test challenges including: too many test method trade-offs; a need for better analysis tools; inability to monitor pulse behavior over long periods of time; the need to eliminate measurement setup errors; and, timing and synchronization issues
Home page PDF
BTS Master MT8220T

BTS Master MT8220T

The BTS Master MT8220T is Anritsu’s third generation high-performance handheld base station analyzer that has been specifically developed to advance the support for 4G wireless networks as well as installed 2G, 3G and WiMAX networks. The MT8220T provides 20 MHz bandwidth modulation quality for LTE eNobeB testing and is equipped with a high-contrast, touch screen display and backlit key panel making it simple to use in both bright sunlight and dim conditions. The BTS Master MT8220T Base Station Analyzer is the essential multi-function instrument for senior wireless technicians and RF engineers to accurately and quickly verify the installation and commissioning of base stations for optimal wireless network performance and for the on-going maintenance and troubleshooting to keep wireless network infrastructure fine-tuned. A standard three-year warranty demonstrates world-class reliability and brings peace-of-mind to owning and using the MT8220T BTS Master.
Home page PDF
BERTWave MP2100A

BERTWave MP2100A

The MP2100A is an all-in-one BERT and EYE/Pulse Scope solution for evaluating optical active devices in optical communication systems. To meet the need for the fastest possible measurement speeds on production lines for active optical devices, the Gating Time has been slashed by 90% compared to conventional BERT equipment using remote commands and the EYE/Pulse Scope function is 300% faster. In addition, measurement times are much shorter due to the simultaneous BER measurement and EYE pattern analysis.
Home page PDF
Signal Quality Analyzer-MP1800A

Signal Quality Analyzer-MP1800A

The MP1800A Signal Quality Analyzer is an expandable plug-in modular BERT with built-in Pulse Pattern Generator (PPG) supporting output of high-quality, high-amplitude signals, Error Detector (ED) with high input sensitivity supporting signal analysis, such as Bathtub Jitter and Eye Diagram Measurements, plus a jitter modulation source for generating various jitters, such as SJ/RJ/BUJ/SSC, and supporting Jitter Tolerance tests. The MP1800A supports wideband bit rates from 0.1 to 32.1 Gbit/s for versatile signal integrity analysis applications up to 32 Gbit/s, such as 100GbE (25G x 4), OTU-4 (28G x 4), 32G DP-QPSK, CEI-28G, 32G FC, and Infiniband EDR (26 G). Combination with the MP1821A and MP1822A supports BER tests up to 56 Gbit/s for next-generation R&D, including CEI-56G-VSR.
Home page PDF
Signal Analyzers-MS2690A

Signal Analyzers-MS2690A

MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution. The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.
Home page PDF
Spectrum Analyzer/Signal Analyzer MS2830A

Spectrum Analyzer/Signal Analyzer MS2830A

The MS2830A supports an optional vector signal generator (VSG) and can be used as a reference signal source for tests of parts Tx characteristics or as a signal source for tests of Rx characteristics. Installing the VSG option cuts investment costs and footprint size. The IQproducer PC software generates waveform patterns for the VSG, supporting various communication methods, including LTE FDD, LTE TDD (TD-LTE), Mobile WiMAX, etc. The analysis options up to 125 MHz can also be installed along with various measurement software tools supporting PC-free modulation analysis of various communication systems. For example, installing the LTE Downlink/Uplink Measurement Software and LTE IQproducer LTE supports Tx characteristics/modulation analysis for LTE FDD BTS and Rx characteristics tests.
Home page PDF
Signaling Tester-MD8475A

Signaling Tester-MD8475A

The MD8475A Signaling Tester is an all-in-one base station simulator supporting LTE FDD, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS, and CDMA2000® 1X/1xEV-DO Rev. A. It supports service and call-processing tests for multimode LTE smartphones and mobiles with excellent cost-performance. A full line of test environments are supported for the general mobile verification phase, such as max. throughput performance tests, stress tests, and battery consumption tests of multisystem LTE mobiles using 2x2 MIMO, as well as CS-Fallback, call connection reliability and stability tests at handover, communication tests at low RF power, and service verification using LTE Multiple PDN and SMS in a 2-cell environment*. In addition, test conditions are easily set using the SmartStudio GUI, helping cut test environment configuration time.
Home page PDF
Network Master MT9090A

Network Master MT9090A

The new, palm-size MT9090A modular platform from Anritsu finally addresses all of these needs. Users can interchange different modules to configure the MT9090A as an optical fault locator, general purpose OTDR, CWDM optical channel analyzer or 10/100/1000MB Ethernet tester. Operation is quite similar between modules so the user is immediately familiar with operation. Small but Capable Despite its small size, the MT9090A does not compromise performance or features. With a high resolution indoor/outdoor display, excellent optical performance, innovative features and expandable modular design, the MT9090A Network Master is clearly in a different class than most other "handheld testers".
Home page PDF
TOTOKU TCF Series

TOTOKU TCF Series

Flexible,The World First 110GHz Application,Mating Flexibility,Lower Attenuation,Lower Reflective Characteristic,Solid Phase Stability over Temperature and,Bending,The TCF series cables can also be used for ultra high-speed,digital signal transmission.
Home page PDF
RF Power Indicator

RF Power Indicator

Use the MA25100A RF Power Indicator to determine if a connector is "live" with RF power that could damage sensitive measuring equipment. Mate the MA25100A to the connector in question and it will indicate the presence of high-level RF: Yellow LED if RF > +17 dBm (50 mW) or Red LED if RF > +27 dBm (500 mW). The MA25100A can withstand RF power levels up to +50 dBm (100 W) from a 50 Ω source. The MA25100A has a very high VSWR and should not be used as a 50 Ω termination. The MA25100A is always on and always ready. Its self-contained battery can last for years with normal use and is field-replaceable. A "self-test" button lights both indicators (red and yellow) if internal circuits and battery are functioning.
Home page PDF
Microwave Site Master™-S820E

Microwave Site Master™-S820E

Cable & Antenna Analyzer-Anritsu is proud to introduce the world’s most advanced Site Master. With microwave frequency coverage up to 40 GHz,the new S820E completely redefines the standards for portable handheld analyzers, setting another new industry benchmark for performance and accuracy. The new S820E is the culmination of over 50 years of microwave development, utilizing the very latest technologies to deliver accuracy and performance previously reserved only for benchtop instruments. Based on a true 4 channel receiver design, the S820E offers true VNA performance in a portable package.
Home page PDF
40 GHz USB Transmission Sensor SC8268

40 GHz USB Transmission Sensor SC8268

A new, 40 GHz USB Transmission Sensor, model SC8268, has been developed to provide full frequency range support for the 2-port cable loss measurement (also referred to as: Transmission measurement with external sensor) for the S820E series Microwave Site Master. This new sensor operates from 1 MHz to 40 GHz and has a K(m) connector type. The measurement range is from 0 dBm to -50 dBm.
Home page PDF
Cell Master™-MT8212E

Cell Master™-MT8212E

The MT8212E Cell Master™ Base Station Analyzer is the smallest, lightest, and most economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing. It's ideal for installation and commissioning as well as for maintenance and troubleshooting. This optimal combination of base station test capabilities in one handheld device eliminates the need for several independent test instruments, thereby reducing the number of tools the user must carry and learn to operate. Whether it's sweeping cables, making power measurements, finding interference, troubleshooting base station signal quality, or verifying backhaul performance, the Cell Master MT8212E is the ideal all-in-one instrument to help keep your network up and running.
Home page PDF
ACCESS Master MT9083A2

ACCESS Master MT9083A2

The ACCESS Master MT9083A2 features a 7-inch widescreen TFT-LCD display for use both indoors and outdoors, enhanced battery operation time (up to 12 hours) increased operating temperature range (-10° to 50°C) and new short-cut function keys. Until now, installing and maintaining optical networks required technicians to carry a variety of equipment which was not only cumbersome, but also expensive. Hearing this common complaint, Anritsu engineers have developed their new line of MT9083 ACCESS Master OTDRs. The MT9083A2 test sets are designed to make your measurement experience simple and error-free with true one-button fault location, pass/fail classification, automated file saving and naming and even a macrobend detection feature for identifying installation issues. They feature multiple wavelengths and options to satisfy any network testing requirement: access or metro, FTTx or LAN...all without straining your budget.
Home page PDF
Universal Wireless Test Set MT8870A

Universal Wireless Test Set MT8870A

The MT8870A Universal Wireless Test Set is a test instrument from Anritsu that has been specifically designed for high volume manufacturing test of all common cellular and short range wireless technologies. An MT8870A instrument mainframe can contain up to four MU887000A TRX Test modules (10 MHz to 6 GHz*1). Each module has an integrated Vector Signal Generator (VSA) and Vector Signal Analyzer (VSA) to perform DUT transmitter and receiver tests. The MT8870A that has the MU887000A test module is able to control with an external PC to perform RF testing.
Home page PDF
Signaling Tester MD8430A

Signaling Tester MD8430A

Wireless devices are evolving quickly into multimedia smartphones with fast data connections due to widespread deployment of high-speed standards, such as LTE. The MD8430A Signalling Tester is a key LTE base station simulator for developing 3GPP LTE/LTE-Advanced compliant chipsets and wireless devices. In addition to verifying normal communications procedures, it supports fault operation tests, which are difficult to perform at connection with live base stations. It also supports LTE terminal R&D and verification tests under various conditions. Based on extensive experience in 3G markets, Anritsu has developed the MD8430A as a powerful LTE protocol/R&D test solution to help developers bring LTE wireless devices to market as soon as possible.
Home page PDF
Series ShockLine™ Economy Vector Network

Series ShockLine™ Economy Vector Network

The MS46322A is a family of four new Economy ShockLineTM Vector Network Analyzers from Anritsu. The Economy ShockLineTM lineup consists of low-cost, 2-port, 10 MHz to 8 GHz, 20 GHz, 30 GHz, and 40 GHz VNAs in a compact and rugged 2U chassis. The MS46322A family supports SCPI command programming and has software driver support for the most common programming environments. All of the ShockLineTM family VNAs use industry standard LAN communications for robust remote control in production test environments. The MS46322A series also provides a powerful graphical user interface when attached to a user-supplied monitor, keyboard, and mouse. The full-featured user interface enables manual testing of passive devices in production and also makes developing and troubleshooting automated test programs easier.
Home page PDF
Propsim® F8Radio Channel Emulator

Propsim® F8Radio Channel Emulator

Versatile solution forall radio channel emulation needs• Propsim® F8 is the only radio channel emulator on the market that is designed for testing terrestrial as well as aerospace and satellite devices and systems• Ready for testing any existing LTE, LTE-Advanced, TD-LTE, WCDMA, HSPA+, GSM, TD-SCDMA, EV-DO / CDMA2000, TETRA, IS-54, WiMAX and Wi-Fi radio interfaces and any known future wireless system air interfaces• Seamless frequency range up to 220 – 6000 MHz with 40 MHz, 80 MHz or 125 MHz signal bandwidth option
Home page PDF
LMR Master Land Mobile Radio Modulation Analyzer S412E

LMR Master Land Mobile Radio Modulation Analyzer S412E

The LMR Master S412E is Anritsu's second generation solution for installing and maintaining public safety systems. Built on Anritsu's ninth generation handheld platform, the LMR Master combines a high performance receiver / spectrum analyzer with the world's most advanced handheld vector network analyzer plus a CW / P25 (Phase 1 & Phase 2) / NXDN™ / ETSI DMR / MotoTRBO™ signal generator with internally adjustable power from 0 dBm to –130 dBm. The LMR Master S412E is the ideal instrument for Land Mobile Radio (LMR) and Public Safety System technicians and engineers engaged in field testing the RF performance of P25, P25 Phase 2 (TDMA), NXDN™, ETSI DMR, MotoTRBO™, and 700 MHz LTE public safety radio systems in the Part 90 spectrum allocations. In addition the LMR Master offers support for emerging Positive Train Control systems.
Home page PDF
Miniflex™ Outdoor Microduct

Miniflex™ Outdoor Microduct

Miniflex™ Outdoor Microduct is a microduct for the routing of cables and optical fibres wherever there is a need for a UV stable product, such as outdoors. Miniflex™ Outdoor Microduct is identical to Miniflex™ Indoor Microduct except that it is made from a tough UV stable PE polymer. Miniflex™ Outdoor Microduct has a low-friction & low static DVC™ lining to assist in pulling, blowing and pushing of fibre or cable.
Home page PDF
Miniflex™ Indoor Microduct

Miniflex™ Indoor Microduct

Miniflex™ Indoor Microduct is a microduct for the routing of cables and optical fibres within buildings.Miniflex™ Indoor Microduct is made from a flame retardant, Low Smoke Zero Halogen polymer making it suitable to use indoors in the event of fire (EU only). Miniflex™ Indoor Microduct has a low-friction & low static DVC™ lining to assist in pulling, blowing and pushing of fibre or cable.
Home page PDF
TuffDuct™ Direct Buried Microduct

TuffDuct™ Direct Buried Microduct

uffDuct™ is a 10mm microduct for the routing of cables and optical fibres underground and is ultra tough. TuffDuct™ is suitable for direct bury deployment and is available with a tone-wire if required for locating purposes.OD 10mm x ID 6mm 49.1Kg/Km 2000N/450lbf Crush Resistance
Home page PDF
Miniflex™ Fibre Cable

Miniflex™ Fibre Cable

Miniflex™ Fibre Cable is a flexible fibre optic cable made from crush resistant durable polymer. Miniflex™ Fibre Cable has exceptionally low weight for the level of strength and protection it provides. Miniflex™ Fibre Cable is available with many different counts & types of fibre and is suitable for installation using blowing, pulling and pushing techniques
Home page PDF
Miniflex™ Plenum Cable

Miniflex™ Plenum Cable

Indoor Plenum rated fibre cable available with 2-24 fibres. Industry standard 250 micron Singlemode and Multimode. Tough yet flexible Miniflex™ Plenum Cable can be easily routed in tight areas. The compact and light weight properties are suitable for routing in trays and racks and the cables anti-kink properties makes handling the optical fibre much safer. The cable also provides protection in areas where optical fibre is exposed to human contact, Miniflex™ picks up where your armoured cable ends and continues to provide end to end to end Optical Fibre Protection. Available terminated or unterminated.
Home page PDF
Miniflex™ Pre-terminated Fibre Cable

Miniflex™ Pre-terminated Fibre Cable

Miniflex™ Pre-terminated Fibre Cable, made using Miniflex™ Fibre Cable with your choice of industry standard connector.Miniflex™ Pre-terminated Fibre Cable has exceptionally low weight for the level of strength and protection it provides.
Home page PDF
Miniflex™ Fibre Cable – QuikPush

Miniflex™ Fibre Cable – QuikPush

Miniflex™ Fibre Cable - QuikPush is made from crush resistant hard plastic, designed to allow pre-terminated cable to be routed in the field without the need for a splice. QuikPush connectors use a slimline, pushable pre-terminated ferrule with a self-assembly SC Connector. Quick and easy to assemble, it requires no expensive equipment or messy splices. The Miniflex™ cable ensures the fibre is fully protected yet ultra flexible.
Home page PDF
Frequency Multipliers

Frequency Multipliers

Phase Matrix’s custom, high-performance frequency-multiplier modules use state-of-the-art MMICs, discrete devices, and filters to achieve the desired multiplication ratio, power output, and spurious performance. Custom narrowband and wideband multipliers up to 67 GHz are available upon request. - See more at: http://www.phasematrix.net/phasematrix/products/microwave-components#sthash.JIacdJ8d.dpuf
Home page PDF
Narrowband VCOs

Narrowband VCOs

Phase Matrix’s custom line of narrowband, broadband, and fixed-tuned VCOs employ high-performance silicon bi-polar junction transistors (Si BJTs) to achieve very low phase noise. The use of hyper-abrupt silicon varactor diodes enables tuning capability, and GaAs MMIC buffer amplifiers provide the necessary power output and load isolation of the oscillators. VCOs are available in frequencies up to 67 GHz in TO-8, TO-8 surface mount, connectorized SMA output type packages, or other custom-designed housing.
Home page PDF
GPS7500 Noise and Interference Generator

GPS7500 Noise and Interference Generator

GPS7500 Noise and Interference Generator The programmable GPS7500 Noise & Interference Generator is capable of generating up to a 40 MHz wide noise or interference band for GPS receiver susceptibility testing.
Home page PDF
RFeye Array 50

RFeye Array 50

Single channel system configuration: AOA 500 MHz - 6 GHz, TDOA / background monitoring capability 10 MHz - 6 GHz with external omnidirectional antenna connection.
Home page PDF
Network Master Pro MT1000A

Network Master Pro MT1000A

Today’s communication networks are becoming more and more sophisticated as leading network operators install new technologies like OTN, MPLS-TP and Ethernet in their metro and backhaul networks. In some cases, operators must also support Fibre Channel links, while still keeping legacy technologies like PDH/DSn and SDH/SONET operational. The Network Master Pro MT1000A redefines the direction of future test platforms by bringing these network test requirements to a portable device, making it the ideal tool for field testing. •Compact and lightweight design for maximum portability in the field •High performance in a small form factor •Modular platform ensures maximum return on investment
Home page PDF
PIM Analyzer with Site Master Cable&Antenna

PIM Analyzer with Site Master Cable&Antenna

The PIM Master, with Site Master™ option, provides an integrated test solution, capable of certifying both, passive intermodulation (PIM) and line sweep performance with a single test instrument. The new PIM Master offers the same ease of use, ruggedness, and familiar menus as its predecessor, along with new features to enhance productivity and speed site testing.
Home page PDF
H3 Smart Phone with Direct Mode

H3 Smart Phone with Direct Mode

The Android-based H3 Smartphone is part of EB’s award winning Specialized Device Platform portfolio. H3 comes with standard smart phone functionality, enhanced with special features like dedicated PTT button and an advanced RF solution supporting up to 10 LTE frequency bands.
Home page PDF
InterferenceHunter™

InterferenceHunter™

The ergonomically designed MA2700A Handheld InterferenceHunter is equipped with a GPS receiver and antenna, an electronic compass, and a user-selectable preamplifier. It is designed to enhance Interference Mapping, which is part of option 25, Interference Analysis on Anritsu handheld instruments. See the Compatibility Tab for current instruments. More instruments will be added with upcoming firmware releases. With the MA2700A, a vector line to an interfering signal can be added to a map in the instrument with a click of the trigger on the handle. The user can create compatible maps using the new easyMap Tools. Maps that have been creating using easyMap can be panned and zoomed over a coverage area chosen by the user. The MA2700A is powered over USB so it needs no batteries. The internal preamplifier can be toggled on and off with trigger on the MA2700A by holding the trigger for 2 seconds or by pressing a button on the attached instrument. A filter can easily be installed between the antenna and the MA2700A; this would commonly be a bandpass filter for the band of interest.
Home page PDF
XCAL-Mobile

XCAL-Mobile

Capturing RAN performance has never been easier. XCAL-Mobile is a leading handheld air interface monitoring tool that enables QoS and QoE testing across all GSM/WCDMA/EVDO/WiFi technologies.It supports extensive application testing and delivers realtime network measurement, with features controlled using the normal handset keys.
Home page PDF
Handheld InterferenceHunter MA2700A

Handheld InterferenceHunter MA2700A

The ergonomically designed MA2700A Handheld InterferenceHunter is equipped with a GPS receiver and antenna, an electronic compass, and a user-selectable preamplifier. It is designed to enhance Interference Mapping, which is part of option 25, Interference Analysis on Anritsu handheld instruments.With the MA2700A, a vector line to an interfering signal can be added to a map in the instrument with a click of the trigger on the handle. The user can create compatible maps using the new easyMap Tools. Maps that have been creating using easyMap can be panned and zoomed over a coverage area chosen by the user.
Home page PDF
585C

585C

full function pulse/CW counters with an optional internal delaying pulse generator for the ultimate in ease-of-us. Phase Matrix brings to you the broadest spectrum of pulse and CW microwave and millimeter-wave frequency counters available today. These models offer automatic and self contained frequency and power profiling that is ideally suited to such applications as chirped radar analysis, VCO measurement, and frequency agile system analysis over a frequency range up to 170 GHz (depending upon the model selected
Home page PDF



Contact

Filling the information in this section is to permit the provision of promotional email updates
 

    Get eNews